Kit Contents
Ordering Information
Documentation
The CoreMP7-enabled ProASIC3 Development Kit is a complete, fully RoHS-compliant package that enables quick evaluation and design prototyping of Actel's CoreMP7-enabled ProASIC3 family and prototyping your design. ProASIC3 devices support the ARM7™ soft processor IP cores, offering the benefits of programmability and swift time-to-market at costs as low as under $1. The ProASIC3 families are based on nonvolatile flash technology and support 15 k to 3 M gates and up to 620 high-performance I/Os. This kit is fitted with a CoreMP7-enabled ProASIC3 A3P1000-FG484 device. The on-board programmer enables easy experimentation with ISP, device serialization, and FlashLock® on-chip system security. The CoreMP7-enabled ProASIC3 development board has on-board voltage regulation, enabling you to set some of the I/O bank voltages independently.
Key Features:
- Environmentally green, RoHS-compliant board
- Powered by external 5 V power supply
- USB connection for programming
- USB connection for UART
- Ability to measure current consumption of FPGA
- Memory for embedded applications
- On-board programmer—no need for external supplies
- Most cost-effective 1 M system-gate FPGA in the world
Other ProASIC3-based Kits:
Other Cortex-M1-based Kits:
The CoreMP7 ProASIC3 Development Kit includes the following:
- Development board with an M7A3P1000-FGG484
- Full current measurement capability of independent I/O banks and VCC for accurate power analysis
- Oscillator for system clock is provided
- Eight LEDs and eight switches provide simple inputs and outputs to the system
- USB programming and debug connection
- Second USB connection for USB-to-serial (RS232) interface
- Optional board power connector for an external supply, but none is needed when connected to a USB cable
- Memory devices
- 1 MB of SRAM provided on board
- 16 MB of flash memory provided on board
- General purpose I/O banks
- Three 40-pin GPIO banks are provided for interfacing to other equipment. Two of these banks are fully populated.
- FlashPro3 programmer built into board
- FlashPro3 via USB 2.0 connection
- Actel Libero IDE software DVD
- Gold Edition with free unlimited time license
- Supports system-on-chip designs up to 600 k system gates
- Includes best-in-class FPGA tools from industry leaders
- User's guide and tutorial
- Printed circuit board (PCB) schematics
- Sample design
To learn more about the CoreMP7-enabled ProASIC3 Development Kit, please contact your local
Actel Sales representative.
| Part Number |
Description |
| M7A3P-DEV-KIT-SCS |
CoreMP7-enabled ProASIC3 Starter Kit includes a soldered M7A3P1000-FGG484 evaluation board, containing on-board FlashPro3, Libero IDE Gold, user's guides, two USB 2.0 cables, schematics, and sample design. |
Eval Board References
Related Documentation
