Kit Contents
Ordering Information
Resources
Related Information
The Fusion Embedded Development Kit provides a comprehensive solution for quickly evaluating Microsemi's Fusion® mixed-signal FPGA family and prototyping your design. This development kit enables swift design development based on the royalty-free, industry standard ARM® Cortex™-M1 processor or Core8051. The kit is fully RoHS-compliant and contains the incredibly powerful ARM Cortex-M1-enabled Fusion M1AFS1500 device in the FGG484 package
The development kit helps you to demonstrate a single-chip solution for monitoring analog signals, managing power and monitoring temperature in complex embedded systems. The kit also has an on-board voltage regulation mechanism to control internally generated voltage from the Fusion device or externally generated voltage from the on-board regulators. Test points available on the evaluation board enable you to measure total current consumption of the M1AFS1500-FGG484.
The included programming stick enables easy experimentation with ISP, device serialization and FlashLock® on-chip system security.
| Quantity |
Description |
| 1 |
Evaluation board with M1AFS1500-FGG484 device |
| 1 |
Low-cost programming stick(LCPS) |
| 2 |
USB cables |
| 1 |
5 V power supply with international adapters |
| 1 |
Quickstart card |
Web-based content includes Free Libero® Integrated Design Environment (IDE) FPGA development software and Gold license, user's guides, tutorials, design examples and board documentation.
Evaluation board with a M1AFS1500-FGG484 device
- ARM Cortex-M1 enabled M1AFS1500 FPGA
- The largest die in the Fusion family for designs of up to 1,500,000 system gates
- 1 MB of embedded nonvolatile flash memory
- Support for other microprocessor cores, including Core8051s, to permit full experimentation for embedded systems prototyping.
- 512 KB SRAM
- 2 MB SPI flash
- Temperature diode and analog potentiometer
- 32.768 kHz and 50 MHz oscillators are provided
- Four LEDs and four switches provide simple inputs and outputs to the system
- OLED display – Blue 96x16 (0.8") display for quick demos
- USB to UART connection for HyperTerminal on a PC
- Optional board power connector for an external supply, but none is needed when connected to a powered USB cable
- RVI-ME header
- Dynamic system reconfiguration with reconfigurable analog and dynamically reconfigurable flash memory
To purchase a kit or inquire about additional information, please contact your local Microsemi Sales representative.
| Part Number |
Description |
List Price |
| M1AFS-EMBEDDED-KIT |
Fusion Embedded Development Kit |
$250 |
Buy Online:
Avnet Memec WW Distributor,
Digi-Key WW Distributor
For Fusion-related documents, visit the Fusion Documentation page.
User's Guides and Manuals
Tutorials
NOTE : Please unzip design files in the root directory of C drive (i.e. C :\) using 7-Zip. If you need to unzip the design files in a non-root directory, you can refer to http://www.microsemi.com/soc/kb/article.aspx?id=KI8879
Board References
White Papers
Related Files
Related Documentation
Other Fusion-based kits:
Other Cortex-M1-based Kits:
Webcasts:
