Silicon Sculptor v3.87 DOS and v4.50.0 Windows Release Notes
(Mar 28, 2005)
Silicon Sculptor DOS v3.87 and Windows v4.50.0 is a new general release
of Silicon Sculptor software. All users are encouraged to upgrade to
this latest release. This release features modified new algorithm support
for MEC RT54SX-S devices when AFMs generated by Designer 6.1 SP1 are
used. Note that for RT54SX-S and RTSX-SU, this version of Silicon Sculptor
software requires AFMs to be generated or re-generated from Designer
6.1 SP1. The software also supports the improvements made to RTAX-S routing
in Designer 6.1 SP1.
Note: A Silicon Sculptor II programmer must be used
to program all RT54SX-S and RTSX-SU devices starting from this release;
such devices can no longer be programmed on a Silicon Sculptor I programmer.
v3.87 DOS
- Windows 98, Second Edition
v4.50.0
- Windows 2000 with SP1 or SP2 or SP3 or SP4
- Windows XP with SP1 or SP2
- Pentium 133 or higher (Pentium 200 or higher recommended) processor
- 64 MB of available memory for use
- 50 MB of available hard disk space
- VGA or higher-resolution video adapter (SVGA 256-color and 800x600
or higher resolution recommended)
- For NT 4.0, Windows 2000 and Windows XP systems, you must have administration
rights to the local workstation for installation purposes.
- Support added for programming
- RadTolerant Axcelerator RTAX2000S-CG624 and RTAX250S-CQ208 device
- SARno42134: RT54SXS VSV, ISV, IPP, IKS software
update
- SARno42536: Add support for multiple programming
condition--Modified New Algo (MNA)
- SARno45086: Reject RTAXS afm generated with Designer
version 6.1.1.24 and below
- SARno43613: Software does not reject SM240RQ-ACTEL
module to program A42MX36-RQ240
- SARno43737: Blankcheck of programmed and secured
SXS will report Blank.
- SARno43823: PDNA Algorithm error.
- SARno43858: RTSX72SU zero programming yield on SS
I(ICCa test failure)
- SARno44802: A500K270 power up sequencing
- SARno44856: RT54SX-S/RTSX-SU low programming yield
due to high standby current
