FlashPro v10.0 Release Notes
(January 11, 2012)
Thank you for your interest in Microsemi's FlashPro v10.0.
FlashPro software is packaged with Libero software and installed by default. If you install Libero software you do not need to install FlashPro stand-alone.
FlashPro is available as a stand-alone installation for programming-only installations.
SmartFusion A2F060M3E 144 TQFP Device and Programming
| Die |
Package |
Speed |
Core Voltage |
Temp Ranges |
| A2F060M3E |
144 TQFP |
STD, -1 |
1.5v |
COM, IND |
256 CQFP Packages for RT ProASIC3
| Die |
Package |
Speed Grade |
Temperature |
| RT3PE600L |
256 CQFP |
STD, -1 |
MIL |
| RT3PE3000L |
256 CQFP |
STD, -1 |
MIL |
35009 - No driver support for Windows 7 64-bit operating systems.
28759 - SVF/1532 programming is not supported for A3PE1500 Rev A devices.
- To identify A3PE1500 Rev. A devices locate the date code written on the top of the device. A date code of 4307 or lower identifies A3PE1500 Rev A.
- Format: <weekOfTheYear><Year>. Example: 0510, would be week 5 of 2010.
6871 - Cannot load the same PDB for multiple devices or copy and paste
Workaround: Use STAPL files. Generate STAPL files from Libero software or FlashPro.
32789 - Workaround for SmartDebug eNVM TCL commands in STAPL flow
eNVM TCL commands fail using STAPL file. Most designers use design-generated PDB file. However, if the PDB file is not available, you can create an express PDB file and run eNVM TCL commands using that file.
Refer to System Requirements for information regarding operating system and minimum system requirements.
The FlashPro software is packaged with Libero software and installed by default. If you install Libero software you do not need to install FlashPro stand-alone.
FlashPro software is available as a standalone installation for programming-only installations.
