Actel to Offer Complete Hardware Support for Industry's Lowest Cost FPGA Solutions with New Programmer and Starter Kit
Development Solutions Enable Examination of ISP and Security Features
of New Flash-Based ProASIC3/E FPGAs
MOUNTAIN VIEW, Calif., January 24, 2005 —
Actel Corporation
(Nasdaq: ACTL) today announced a new low-cost device programmer and starter
kit to support its new flash-based ProASIC3 and ProASIC3E field-programmable
gate array (FPGA) families, also introduced today (See separate press
release entitled, "Actel's
Third-Generation Flash-Based Devices Set the Bar at $1.50 as Industry's
Lowest Cost FPGA Solution").
Compatible with the high-speed USB 2.0 specification, the new portable
FlashPro3 programmer offers low-cost, full-speed programming for the
devices. Actel's new ProASIC3 Starter Kit allows designers to examine,
design and program the nonvolatile ProASIC3/E devices, the industry's
lowest-cost FPGA solutions. Specifically designed to support the single-chip
ProASIC3/E devices, the FlashPro3 programmer and ProASIC3 Starter Kit
allow exploration of the unique architectural features of the ProASIC3/E
devices. Using these new tools, engineers can examine secure in-system
programmability (ISP) using AES encryption.
"With a complete, low-cost hardware support package for our third-generation,
flash-based ProASIC3/E devices, our customers can easily begin creating
designs for their cost-sensitive applications," said Saloni Howard-Sarin,
director of antifuse and tools marketing at Actel. "Our new USB
2.0-compliant FlashPro3 programmer will enable Actel's customers to program
their ProASIC3 solutions in less than 30 seconds while our new low-cost
ProASIC3 Starter Kit will allow users to quickly realize the unique advantages
offered by our new nonvolatile FPGAs, including ISP and optimized security
features."
Cost-Effective Programming with FlashPro3 Programmer
For customer-designed boards that include more than one ProASIC3 device,
FlashPro3 can program or test a daisy chain of FPGAs using Actel's ChainBuilder
software. Specific FPGAs can also be selected from among other FPGAs
in the chain, which may contain both Actel and non-Actel devices, to
be programmed individually or automatically in sequence, via a common
header attached to the JTAG chain. Likewise, several FlashPro3 programmers
may be connected to one PC via a high-speed USB hub to allow up to 16
devices or boards to be programmed in parallel, each at full-speed, delivering
a substantial reduction in programming time over previous systems. Additionally,
by connecting the programmer to FPGAs already soldered on a board using
the industry-standard JTAG 10-pin interface, FlashPro3 may be used for
in-system programming of customer boards.
The FlashPro3 programmer is supported by Actel's FlashPro software.
FlashPro3 supports the Standard Test and Programming Language (STAPL),
making the device independent of any specific programming algorithms.
The algorithm is embedded into the programming file, independent of the
FlashPro software, enabling the same programming file to be used with
other STAPL-compliant programmers. ProASIC3/E devices are compliant with
IEEE1532-based device programming, which uses the IEEE1149 JTAG standard
as the physical protocol. Because programming data and algorithms are
separate in IEEE1532-based programming, one can be modified without affecting
the other, thereby easing upgrading.
Comprehensive Low-Cost ProASIC3 Starter Kit
The ProASIC3 Starter Kit includes everything a designer needs to quickly
evaluate, design and program the new ProASIC3/E devices. The ProASIC3/E
Starter Kit consists of an evaluation board with a ProASIC3E device,
Actel's Libero Gold 6.1 Integrated Design Environment, the FlashPro3
programmer, USB cable, programming cable, power supply, tutorials and
support documentation.
About ProASIC3
The industry's lowest cost FPGA solution, Actel's new live at power-up,
low-power, highly secure ProASIC3/E FGPAs deliver 64-bit 66 MHz PCI performance
and are the industry's first FPGAs with on-chip user flash memory. The
10 devices in the ProASIC3/E families, ranging in density from 30,000
to 3-million system gates, deliver technology-leading integrated secure
ISP.
Pricing and Availability
A standalone version of the low-cost FlashPro3 programmer is available
now for use with Actel's ProASIC3/E devices. Pricing for the new programmer
begins at $125. The new low-cost ProASIC3 Starter Kit will be available
in Q2 2005 for $249. For further information about pricing and availability,
please contact Actel.
About Actel
Actel Corporation is a supplier
of innovative programmable logic solutions, including field-programmable
gate arrays (FPGAs) based on antifuse and flash technologies, high-performance
intellectual property (IP) cores, software development tools and design
services, targeted for the high-speed communications, application-specific
integrated circuit (ASIC) replacement and radiation-tolerant markets.
Founded in 1985, Actel employs more than 500 people worldwide. The
Company is traded on the Nasdaq National Market under the symbol ACTL
and is headquartered at 2061 Stierlin Court, Mountain View, CA, 94043-4655.
Telephone: 888-99-ACTEL (992-2835). Internet:: http://www.actel.com.
Contact: Stephanie Mrus, Actel Corporation, 650.318.4614
